Table of Content
Applying High Gloss Top Coat over Plasti Dip Spray colors can cause some dulling when combination is applied over cast vinyl. Flexible, specialty rubber coating ideal for repairing rusted or damaged dishwasher racks and other vinyl-coated racks. Dipping and removing too quickly can cause this. Remove at a rate of 1” every 5 seconds.

Unique among Plasti Dip varieties, Plasti Dip Smoke’s color changes gradually as more coats are added. After one or two coats, it’s a light, smoky gray. Each additional coat gives Plasti Dip Smoke a darker, deeper hue—from gray to charcoal to black, all with the same distinct smokiness. Plasti Dip Enhancers are formulated to bond with the unique chemical structure of cured Plasti Dip for superior adhesion and long life. Plasti Dip Enhancers are not recommended for use on any other surface. Satinizer and Glossifier are especially recommended for use with Plasti Dip Blaze products to keep the color’s vibrancy.
Metalizer
Plasti Dip Enhancers are formulated to bond only with the unique chemical structure of Plasti Dip and are not recommended for use on other surfaces. When following the directions, you can apply as many coats of Plasti Dip protective coating as you like. In most uses mils thickness is adequate (2 dip coats, 3-4 brush coats, 4-5 spray coats).

Must be used in a well-ventilated area. Create a glow-in-the-dark look by adding our Glow colors on top of Plasti Dip White spray. Clear high-strength leather and vinyl repair designed to mend small rips, tears and holes in most types of vinyl and leather materials. Join our online community to get the latest news, product announcements, dip tips, videos, and more!
How thick can I apply Plasti Dip?
For best results the surfaces being coated must have a smooth unbroken OEM finish. Allow 30 minutes minimum between coats. Apply as many coats as desired (3-4 average). Hold can 6-10” from surface, moving can back and forth, slightly overlapping each stroke.

Also, allow each coat to fully dry before applying more product. Mix thoroughly before each use and refill. Apply additional coats as needed. Use naphtha, xylene or toluene for cleanup.
What is Plasti Dip?
Use naphtha, xylene , or toluene for cleanup. To greatly increase non-skid properties, sprinkle a generous amount of grit onto wet surface of first coat. Apply at least two additional coats of Plasti Dip.

Your local hardware, home center, or paint store may also sell tubes of tinting colors. Add approximately 1/3 of a 1 oz. Liquid can will cover approximately 5 sq. The Create Your Color Kit comes with one 22 oz.
Plasti Dip Enhancers are specially designed to make our already outstanding Plasti Dip Colors even better. Our Enhancers are easy to use and will give any Plasti Dipped item a unique look. Plasti Dip, whether in our original dip-on/brush-on formula or our aerosol variety, dries to a soft, satin finish. Use care when applying Plasti Dip Primer. Not intended for use with any other product.
Plasti Dip protective coating has excellent resistance to acids, alkaline, and most common household chemicals. However, it is best to test this before going ahead with your application. Plasti Dip does have limited resistance to petroleum-based products. While Plasti Dip has been used for dishwasher rack repair in the past, it is not recommended. Our ReRACK™ product is much better suited for this application and works very well. Mixing different colors of Plasti Dip protective coating can be done to achieve other colors.
For manufactuers, industrial users/professionals and industrial distributors, please visit PerformixCoatings.com. Apply using electric turbine style spray system or an HVLP spray gun with pressure pot system. Plasti Dip Luxury Metal is available in 11 oz. Plasti Dip Camo is a special collection of Plasti Dip colors designed to match the many shades of nature.
Greater thickness might be necessary for aesthetic reasons or in extreme cases. Plasti Dip protective coating has a satin finish. If you are experiencing a cloudy or hazy finish, it’s likely caused by high humidity. Avoid these conditions or add approximately 5-10% naphtha to reduce the problem.